Offshore steel structures and ship coating (heavy-duty)
Model

SeaMate M acrylic

SeaMate M (0WK) is the acrylic primer / intermediate coat / antifouling in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for SeaMate M.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaMate M — product overview

one-component acrylic product for use as primer / intermediate coat / antifouling; manufactured to the manufacturer's technical data sheet; substrates carbon steel; service environment immersion service.

SeaMate M — positioning

SeaMate M is a acrylic primer / intermediate coat / antifouling from the Jotun range, formulated for steel structures in immersion service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

This model is manufactured to the manufacturer's technical data sheet.

Typical service environment: immersion service.

SeaMate M — key data

ModelSeaMate M
Manufacturer product name0WK
Resin systemacrylic
Componentsone-component
Typical number of coatsprimer / intermediate coat / antifouling
Service environmentimmersion service
Suitable substratescarbon steel
Colour rangeDark red / light red
Application methodairless spray / brush / roller
Volume solids58 % ± 2 %
Density (specific gravity)1.7 kg/l
Flash point25 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seamate-m.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C10 °C23 °C40 °C
Touch dry5 h2 h45 min30 min30 min
Recoat, minimum24 h16 h9 h7 h6 h

Data taken from the manufacturer's TDS jotun-seamate-m.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for SeaMate M follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

SeaMate M — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for SeaMate M, send a request at the foot of this page, or contact us on WhatsApp or by email.

SeaMate M — common questions

What service environment suits SeaMate M?

The service environment for this model is immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does SeaMate M have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for SeaMate M?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to SeaMate M

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaMate M

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat