SeaForce 30 M acrylic
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
SeaForce 30 M — product overview
A one-component acrylic coating, normally used as primer / intermediate coat / topcoat / antifouling: key features manufactured to the manufacturer's technical data sheet; used in immersion service / low-temperature application; suitable on carbon steel.
SeaForce 30 M — positioning
SeaForce 30 M is a acrylic primer / intermediate coat / topcoat / antifouling from the Jotun range, formulated for steel structures in immersion service / low-temperature application.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: immersion service / low-temperature application.
SeaForce 30 M — key data
| Model | SeaForce 30 M |
|---|---|
| Manufacturer product name | 0YS |
| Resin system | acrylic |
| Components | one-component |
| Typical number of coats | primer / intermediate coat / topcoat / antifouling |
| Service environment | immersion service / low-temperature application |
| Suitable substrates | carbon steel |
| Colour range | Red / brown |
| Application method | airless spray / brush / roller |
| Volume solids | 62 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 27 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-seaforce-30-m.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | 0 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 5 h | 2 h | 45 min | 30 min | 30 min |
| Recoat, minimum | 48 h | 36 h | 9 h | 7 h | 6 h |
Data taken from the manufacturer's TDS jotun-seaforce-30-m.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / topcoat / antifouling; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the immersion service / low-temperature application environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 3233
- ISO 3679
Standards and approvals for SeaForce 30 M follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
SeaForce 30 M — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on SeaForce 30 M, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
SeaForce 30 M — common questions
What are the key characteristics of SeaForce 30 M?
This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for SeaForce 30 M controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can SeaForce 30 M be used on?
The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
Models related to SeaForce 30 M
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for SeaForce 30 M
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net