Offshore steel structures and ship coating (heavy-duty)
Model

SeaForce 60 acrylic

SeaForce 60 belongs to the acrylic family of Jotun protective coatings and is used as primer / intermediate coat / topcoat / antifouling in immersion service / low-temperature application service. For the complete technical data, request the manufacturer's TDS and SDS for SeaForce 60.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaForce 60 — product overview

This is a one-component acrylic product, typically used as primer / intermediate coat / topcoat / antifouling. It is characterised by manufactured to the manufacturer's technical data sheet; service environment immersion service / low-temperature application; suitable for protective coating of carbon steel.

SeaForce 60 — positioning

SeaForce 60 belongs to the acrylic family of Jotun protective coatings and is used as primer / intermediate coat / topcoat / antifouling in immersion service / low-temperature application service.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

This model is manufactured to the manufacturer's technical data sheet.

It is used for protective coating work in immersion service / low-temperature application conditions.

SeaForce 60 — key data

ModelSeaForce 60
Manufacturer product name0TW
Resin systemacrylic
Componentsone-component
Typical number of coatsprimer / intermediate coat / topcoat / antifouling
Service environmentimmersion service / low-temperature application
Suitable substratescarbon steel
Colour rangeDark red / light red
Application methodairless spray / brush / roller
Volume solids58 % ± 2 %
Density (specific gravity)1.7 kg/l
Flash point28 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seaforce-60.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C5 °C10 °C23 °C40 °C
Touch dry5 h2 h1 h45 min30 min30 min
Recoat, minimum48 h36 h12 h9 h7 h6 h

Data taken from the manufacturer's TDS jotun-seaforce-60.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

SeaForce 60 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for SeaForce 60, send a request at the foot of this page, or contact us on WhatsApp or by email.

SeaForce 60 — common questions

How is the recoat interval for SeaForce 60 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can SeaForce 60 be used on?

The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits SeaForce 60?

The service environment for this model is immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to SeaForce 60

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaForce 60

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat