SeaForce 60 M acrylic
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
SeaForce 60 M — product overview
one-component acrylic product for use as primer / intermediate coat / topcoat / antifouling; manufactured to the manufacturer's technical data sheet; substrates carbon steel; service environment immersion service / low-temperature application.
SeaForce 60 M — positioning
Jotun's SeaForce 60 M is a acrylic primer / intermediate coat / topcoat / antifouling for immersion service / low-temperature application conditions, supplied with its technical documentation.
Three things decide the system: the substrate (carbon steel), the service environment (immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
It is used for protective coating work in immersion service / low-temperature application conditions.
SeaForce 60 M — key data
| Model | SeaForce 60 M |
|---|---|
| Manufacturer product name | 0YT |
| Resin system | acrylic |
| Components | one-component |
| Typical number of coats | primer / intermediate coat / topcoat / antifouling |
| Service environment | immersion service / low-temperature application |
| Suitable substrates | carbon steel |
| Colour range | Red / brown |
| Application method | airless spray / brush / roller |
| Volume solids | 62 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 27 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-seaforce-60-m.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | 0 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 5 h | 2 h | 45 min | 30 min | 30 min |
| Recoat, minimum | 48 h | 36 h | 9 h | 7 h | 6 h |
Data taken from the manufacturer's TDS jotun-seaforce-60-m.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / topcoat / antifouling; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the immersion service / low-temperature application environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
SeaForce 60 M — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for SeaForce 60 M, send a request at the foot of this page, or contact us on WhatsApp or by email.
SeaForce 60 M — common questions
Where can I find the technical data for SeaForce 60 M?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does SeaForce 60 M take in the system?
This model is typically used as primer / intermediate coat / topcoat / antifouling. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for SeaForce 60 M?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to SeaForce 60 M
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for SeaForce 60 M
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net