Offshore steel structures and ship coating (heavy-duty)
Model

Resist ZES inorganic zinc silicate

Resist ZES (0F3) is the inorganic zinc silicate primer in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for Resist ZES.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Resist ZES — product overview

A two-component inorganic zinc silicate coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel.

Resist ZES — positioning

Jotun's Resist ZES is a inorganic zinc silicate primer for atmospheric exposure conditions, supplied with its technical documentation.

Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

This model is manufactured to the manufacturer's technical data sheet.

Typical service environment: atmospheric exposure.

Resist ZES — key data

ModelResist ZES
Manufacturer product name0F3
Resin systeminorganic zinc silicate
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel
Colour rangeGrey
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids69 % ± 2 %
Density (specific gravity)2.1 kg/l
Flash point16 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-resist-zes.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry1 h30 min15 min10 min
Walk-on dry2 h1 h30 min20 min
Recoat, minimum84 h42 h18 h10 h
Dried/cured for service84 h42 h18 h10 h

Data taken from the manufacturer's TDS jotun-resist-zes.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Resist ZES — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Resist ZES, send a request at the foot of this page, or contact us on WhatsApp or by email.

Resist ZES — common questions

How many components does Resist ZES have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Resist ZES?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Resist ZES take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Resist ZES

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Resist ZES

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat