Offshore steel structures and ship coating (heavy-duty)
Model

Resist 65 inorganic zinc silicate

Resist 65 is a inorganic zinc silicate primer from the Jotun range, formulated for steel structures in atmospheric exposure. For the complete technical data, request the manufacturer's TDS and SDS for Resist 65.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Resist 65 — product overview

A two-component inorganic zinc silicate coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel.

Resist 65 — positioning

Resist 65 (0D8) — in the Jotun range — is a inorganic zinc silicate product normally used as primer where atmospheric exposure conditions apply.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

This model is manufactured to the manufacturer's technical data sheet.

Typical service environment: atmospheric exposure.

Resist 65 — key data

ModelResist 65
Manufacturer product name0D8
Resin systeminorganic zinc silicate
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel
Colour rangeGrey
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids72 % ± 2 %
Density (specific gravity)2.4 kg/l
Flash point16 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-resist-65.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry1 h30 min15 min10 min
Walk-on dry2 h1 h30 min20 min
Recoat, minimum84 h42 h18 h10 h
Dried/cured for service84 h42 h18 h10 h

Data taken from the manufacturer's TDS jotun-resist-65.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Resist 65 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Resist 65 and the intended use.

Resist 65 — common questions

What service environment suits Resist 65?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Resist 65 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Resist 65?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Resist 65

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Resist 65

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat