Muki Z 1000 WF inorganic zinc silicate
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Muki Z 1000 WF — product overview
two-component inorganic zinc silicate product for use as primer; fast-drying / abrasion-resistant; substrates carbon steel; service environment atmospheric exposure.
Muki Z 1000 WF — positioning
Muki Z 1000 WF is a inorganic zinc silicate primer from the Jotun range, formulated for steel structures in atmospheric exposure.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where fast-drying / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Muki Z 1000 WF — key data
| Model | Muki Z 1000 WF |
|---|---|
| Manufacturer product name | 6AA |
| Resin system | inorganic zinc silicate |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Key characteristics | fast-drying / abrasion-resistant |
| Colour range | Grey / Green / Red / Blue |
| Application method | airless spray |
| Surface preparation grade | sa 2½ |
| Volume solids | 62 % ± 2 % |
| Density (specific gravity) | 2.6 kg/l |
| Flash point | 120 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-muki-z-1000-wf.pdf) |
Application and system notes
Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 23 °C | 40 °C |
|---|---|---|
| Walk-on dry | 3 min | 2 min |
| Recoat, minimum | 1 d | 1 d |
| Dried/cured for service | 1 d | 1 d |
Data taken from the manufacturer's TDS jotun-muki-z-1000-wf.pdf (page 3); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Muki Z 1000 WF — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Muki Z 1000 WF and the intended use.
Muki Z 1000 WF — common questions
How many components does Muki Z 1000 WF have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Muki Z 1000 WF?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Muki Z 1000 WF take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Muki Z 1000 WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Muki Z 1000 WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net