Resist 86 inorganic zinc silicate
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Resist 86 — product overview
This is a two-component inorganic zinc silicate product, typically used as primer. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of carbon steel.
Resist 86 — positioning
A inorganic zinc silicate primer in the Jotun range, Resist 86 (0KH) is selected for steel structures exposed to atmospheric exposure.
Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure.
Resist 86 — key data
| Model | Resist 86 |
|---|---|
| Manufacturer product name | 0KH |
| Resin system | inorganic zinc silicate |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Colour range | Grey green / grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 67 % ± 2 % |
| Density (specific gravity) | 2.6 kg/l |
| Flash point | 14 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-resist-86.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 1 h | 30 min | 15 min | 13 min |
| Walk-on dry | 1.5 h | 45 min | 30 min | 25 min |
| Recoat, minimum | 18 h | 13 h | 4 h | 1.5 h |
| Dried/cured for service | 18 h | 13 h | 4 h | 1.5 h |
Data taken from the manufacturer's TDS jotun-resist-86.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- ASTM D520
- GB 30981.2
- GB 30981.2-2025
- ISO 12944-2
- ISO 12944-5
- ISO 2813
- ISO 3679
- ISO 8501-1
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Resist 86 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Resist 86 and the intended use.
Resist 86 — common questions
How is the recoat interval for Resist 86 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Resist 86 be used on?
The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Resist 86?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Resist 86
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Resist 86
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net