Offshore steel structures and ship coating (heavy-duty)
Model

Resist 18 WF zinc-rich

Resist 18 WF (3WD) — in the Jotun range — is a zinc-rich product normally used as primer where immersion service conditions apply. For the complete technical data, request the manufacturer's TDS and SDS for Resist 18 WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Resist 18 WF — product overview

Resist 18 WF belongs to the zinc-rich system and is a two-component product used as primer; service environment immersion service; application and system notes are set out below.

Resist 18 WF — positioning

Resist 18 WF is a zinc-rich primer from the Jotun range, formulated for steel structures in immersion service.

Three things decide the system: the substrate (steel), the service environment (immersion service) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Service environments include immersion service; send the actual conditions for anything outside that range.

Resist 18 WF — key data

ModelResist 18 WF
Manufacturer product name3WD
Resin systemzinc-rich
Componentstwo-component
Typical number of coatsprimer
Service environmentimmersion service
Colour rangeGrey
Application methodairless spray / brush / conventional spray
Surface preparation gradesa 2½
Volume solids57 % ± 2 %
Density (specific gravity)2.9 kg/l
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-resist-18-wf.pdf)

Application and system notes

Application: airless spray / brush / conventional spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Walk-on dry80 min20 min10 min
Dried/cured for service10 d5 d3 d

Data taken from the manufacturer's TDS jotun-resist-18-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the immersion service environment.

Standards and approvals

Standards and approvals for Resist 18 WF follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Resist 18 WF — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Resist 18 WF, send a request at the foot of this page, or contact us on WhatsApp or by email.

Resist 18 WF — common questions

How many components does Resist 18 WF have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Resist 18 WF?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Resist 18 WF take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Resist 18 WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Resist 18 WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat