Offshore steel structures and ship coating (heavy-duty)
Model

Balloxy HB Light modified epoxy

Balloxy HB Light (0BR) is the modified epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers high solids / high-build / surface-tolerant / ballast tanks. For the complete technical data, request the manufacturer's TDS and SDS for Balloxy HB Light.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Balloxy HB Light — product overview

two-component modified epoxy product for use as primer / intermediate coat / topcoat; high solids / high-build / surface-tolerant / ballast tanks; substrates carbon steel / galvanised steel / stainless steel / coated surfaces; service environment atmospheric exposure / immersion service / low-temperature application.

Balloxy HB Light — positioning

Balloxy HB Light belongs to the modified epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service / low-temperature application service.

The substrate for this product is carbon steel / galvanised steel / stainless steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

It suits projects where high solids / high-build / surface-tolerant / ballast tanks matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.

Balloxy HB Light — key data

ModelBalloxy HB Light
Manufacturer product name0BR
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel / galvanised steel / stainless steel / coated surfaces
Key characteristicshigh solids / high-build / surface-tolerant / ballast tanks
Colour rangeBeige / green
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids82 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point35 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-balloxy-hb-light.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / coated surfaces), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Balloxy HB Light follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Balloxy HB Light — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Balloxy HB Light, send a request at the foot of this page, or contact us on WhatsApp or by email.

Balloxy HB Light — common questions

What are the key characteristics of Balloxy HB Light?

This model offers high solids / high-build / surface-tolerant / ballast tanks. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Balloxy HB Light controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Balloxy HB Light be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Balloxy HB Light

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Balloxy HB Light

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat