Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic 80 MIO modified epoxy

Jotamastic 80 MIO (0VY) — in the Jotun range — is a modified epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service / low-temperature application conditions apply. This model offers high solids / surface-tolerant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic 80 MIO.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic 80 MIO — product overview

Jotamastic 80 MIO belongs to the modified epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service / low-temperature application; application and system notes are set out below.

Jotamastic 80 MIO — positioning

Jotamastic 80 MIO belongs to the modified epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service / low-temperature application service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Where high solids / surface-tolerant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.

Jotamastic 80 MIO — key data

ModelJotamastic 80 MIO
Manufacturer product name0VY
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel / coated surfaces
Key characteristicshigh solids / surface-tolerant
Colour rangeGrey / Black
Application methodairless spray / brush / roller
Surface preparation gradesa 2 / st 2
Volume solids79 % ± 2 %
Density (specific gravity)1,62 kg/l
Flash point35 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-80-mio.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / coated surfaces / atmospheric exposure / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Jotamastic 80 MIO follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotamastic 80 MIO — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotamastic 80 MIO and the intended use.

Jotamastic 80 MIO — common questions

What are the minimum order quantity and lead time for Jotamastic 80 MIO?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Jotamastic 80 MIO?

This model offers high solids / surface-tolerant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Jotamastic 80 MIO controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Models related to Jotamastic 80 MIO

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic 80 MIO

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat