Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic 80 Aluminium modified epoxy

Jotamastic 80 Aluminium is a modified epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service / low-temperature application. This model offers high solids / surface-tolerant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic 80 Aluminium.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic 80 Aluminium — product overview

Jotamastic 80 Aluminium belongs to the modified epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service / low-temperature application; application and system notes are set out below.

Jotamastic 80 Aluminium — positioning

Jotamastic 80 Aluminium is the modified epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service / low-temperature application service.

Three things decide the system: the substrate (carbon steel / coated surfaces), the service environment (atmospheric exposure / immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

It suits projects where high solids / surface-tolerant matters — tight application windows or demanding maintenance regimes.

Service environments include atmospheric exposure / immersion service / low-temperature application; send the actual conditions for anything outside that range.

Jotamastic 80 Aluminium — key data

ModelJotamastic 80 Aluminium
Manufacturer product name0AR
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel / coated surfaces
Key characteristicshigh solids / surface-tolerant
Colour rangeAluminium red
Application methodairless spray / brush / roller
Surface preparation gradesa 2 / st 2
Volume solids80 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point35 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-80-aluminium.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / coated surfaces), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotamastic 80 Aluminium — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotamastic 80 Aluminium and the intended use.

Jotamastic 80 Aluminium — common questions

How many components does Jotamastic 80 Aluminium have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Jotamastic 80 Aluminium?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jotamastic 80 Aluminium take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Jotamastic 80 Aluminium

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic 80 Aluminium

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat