Baltoflake Ecolife unsaturated polyester
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Baltoflake Ecolife — product overview
three-component unsaturated polyester product for use as primer / intermediate coat / topcoat; high-build / abrasion-resistant; substrates carbon steel / stainless steel; service environment atmospheric exposure / immersion service.
Baltoflake Ecolife — positioning
A unsaturated polyester primer / intermediate coat / topcoat in the Jotun range, Baltoflake Ecolife () is selected for steel structures exposed to atmospheric exposure / immersion service.
The substrate for this product is carbon steel / stainless steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in atmospheric exposure / immersion service conditions.
Baltoflake Ecolife — key data
| Model | Baltoflake Ecolife |
|---|---|
| Manufacturer product name | |
| Resin system | unsaturated polyester |
| Components | three-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / stainless steel |
| Key characteristics | high-build / abrasion-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 93 % ± 2 % |
| Density (specific gravity) | 1.2 kg/l |
| Flash point | 53 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-baltoflake-ecolife.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel and the corrosivity of the atmospheric exposure / immersion service environment.
Standards and approvals
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- ISO 8503-2
- Norsok M-501
Standards and approvals for Baltoflake Ecolife follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Baltoflake Ecolife — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Baltoflake Ecolife, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Baltoflake Ecolife — common questions
Where can I find the technical data for Baltoflake Ecolife?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Baltoflake Ecolife take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Baltoflake Ecolife?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Baltoflake Ecolife
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Baltoflake Ecolife
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net