Offshore steel structures and ship coating (heavy-duty)
Model

Baltoflake S2000 unsaturated polyester

Baltoflake S2000 belongs to the unsaturated polyester family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service service. This model offers high-build / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Baltoflake S2000.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Baltoflake S2000 — product overview

Baltoflake S2000 belongs to the unsaturated polyester system and is a four-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.

Baltoflake S2000 — positioning

A unsaturated polyester primer / intermediate coat / topcoat in the Jotun range, Baltoflake S2000 (276) is selected for steel structures exposed to atmospheric exposure / immersion service.

The substrate for this product is carbon steel / stainless steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

It suits projects where high-build / abrasion-resistant matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Baltoflake S2000 — key data

ModelBaltoflake S2000
Manufacturer product name276
Resin systemunsaturated polyester
Componentsfour-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel
Key characteristicshigh-build / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids96 % ± 2 %
Density (specific gravity)1.7 kg/l
Flash point34 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-baltoflake-s2000.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry3 h2 h2 h
Walk-on dry5 h2 h2 h
Recoat, minimum5 h2 h2 h
Dried/cured for service4 d2 d1 d

Data taken from the manufacturer's TDS jotun-baltoflake-s2000.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / stainless steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Baltoflake S2000 — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Baltoflake S2000 and the intended use.

Baltoflake S2000 — common questions

How is the recoat interval for Baltoflake S2000 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Baltoflake S2000 be used on?

The TDS lists the substrate as carbon steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Baltoflake S2000?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Baltoflake S2000

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Baltoflake S2000

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat