Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Midcoat M20 S modified epoxy

Jotun's Penguard Midcoat M20 S is a modified epoxy intermediate coat for atmospheric exposure conditions, supplied with its technical documentation. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Midcoat M20 S.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Midcoat M20 S — product overview

A two-component modified epoxy coating, normally used as intermediate coat: key features fast-drying; used in atmospheric exposure; suitable on steel.

Penguard Midcoat M20 S — positioning

Penguard Midcoat M20 S (6JG) is the modified epoxy intermediate coat in the Jotun range; this page sets out its system position, parameters and supply.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where fast-drying are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Penguard Midcoat M20 S — key data

ModelPenguard Midcoat M20 S
Manufacturer product name6JG
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsintermediate coat
Service environmentatmospheric exposure
Key characteristicsfast-drying
Colour rangeLight grey / white / RAL 7035 / RAL 9001 / RAL 9010 / RAL 9018
Application methodairless spray / brush
Volume solids77 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point30 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-midcoat-m20-s.pdf)

Application and system notes

Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry8 h5 h2 h1 h
Walk-on dry24 h12 h5 h2 h
Recoat, minimum24 h12 h5 h2 h
Dried/cured for service14 d10 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-midcoat-m20-s.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard Midcoat M20 S — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Midcoat M20 S and the intended use.

Penguard Midcoat M20 S — common questions

Where can I find the technical data for Penguard Midcoat M20 S?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Penguard Midcoat M20 S take in the system?

This model is typically used as intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Penguard Midcoat M20 S?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Penguard Midcoat M20 S

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Midcoat M20 S

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat