Offshore steel structures and ship coating (heavy-duty)
Model

Jotafix Epoxy Primer modified epoxy

Jotafix Epoxy Primer (03V) — in the Jotun range — is a modified epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / low-temperature application conditions apply. This model offers surface-tolerant. For the complete technical data, request the manufacturer's TDS and SDS for Jotafix Epoxy Primer.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotafix Epoxy Primer — product overview

two-component modified epoxy product for use as primer / intermediate coat / topcoat; surface-tolerant; substrates carbon steel / stainless steel / coated surfaces; service environment atmospheric exposure / low-temperature application.

Jotafix Epoxy Primer — positioning

Jotafix Epoxy Primer is a modified epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / low-temperature application.

Three things decide the system: the substrate (carbon steel / stainless steel / coated surfaces), the service environment (atmospheric exposure / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

The model is notable for surface-tolerant.

Service environments include atmospheric exposure / low-temperature application; send the actual conditions for anything outside that range.

Jotafix Epoxy Primer — key data

ModelJotafix Epoxy Primer
Manufacturer product name03V
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / low-temperature application
Suitable substratescarbon steel / stainless steel / coated surfaces
Key characteristicssurface-tolerant
Colour rangeGrey / Red
Application methodairless spray / brush / roller
Surface preparation gradesa 2 / st 2
Volume solids68 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point31 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotafix-epoxy-primer.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-5 °C0 °C5 °C10 °C23 °C40 °C
Touch dry25 h15 h8 h5 h2.5 h45 min
Walk-on dry48 h40 h20 h12 h6 h2 h
Recoat, minimum40 h30 h15 h8 h4 h1.5 h

Data taken from the manufacturer's TDS jotun-jotafix-epoxy-primer.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel / coated surfaces and the corrosivity of the atmospheric exposure / low-temperature application environment.

Standards and approvals

Standards and approvals for Jotafix Epoxy Primer follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotafix Epoxy Primer — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Jotafix Epoxy Primer, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Jotafix Epoxy Primer — common questions

How is the recoat interval for Jotafix Epoxy Primer controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Jotafix Epoxy Primer be used on?

The TDS lists the substrate as carbon steel / stainless steel / coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Jotafix Epoxy Primer?

The service environment for this model is atmospheric exposure / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Jotafix Epoxy Primer

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotafix Epoxy Primer

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat