Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic 90 GF modified epoxy

Jotamastic 90 GF is the modified epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service / low-temperature application service. This model offers high solids / high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic 90 GF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic 90 GF — product overview

Jotamastic 90 GF belongs to the modified epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service / low-temperature application; application and system notes are set out below.

Jotamastic 90 GF — positioning

A modified epoxy primer / intermediate coat / topcoat in the Jotun range, Jotamastic 90 GF (0C5) is selected for steel structures exposed to atmospheric exposure / immersion service / low-temperature application.

The substrate for this product is carbon steel / galvanised steel / stainless steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

It suits projects where high solids / high-build / surface-tolerant / abrasion-resistant matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.

Jotamastic 90 GF — key data

ModelJotamastic 90 GF
Manufacturer product name0C5
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel / galvanised steel / stainless steel / coated surfaces
Key characteristicshigh solids / high-build / surface-tolerant / abrasion-resistant
Colour rangeGrey / Red
Application methodairless spray / brush
Surface preparation gradesa 2 / st 2
Volume solids80 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point35 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-90-gf.pdf)

Application and system notes

Application: airless spray / brush (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / coated surfaces / atmospheric exposure / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Jotamastic 90 GF follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotamastic 90 GF — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotamastic 90 GF and the intended use.

Jotamastic 90 GF — common questions

Where can I find the technical data for Jotamastic 90 GF?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jotamastic 90 GF take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Jotamastic 90 GF?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Jotamastic 90 GF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic 90 GF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat