Jotamastic 80 E modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotamastic 80 E — product overview
two-component modified epoxy product for use as primer / intermediate coat / topcoat; high solids / surface-tolerant; substrates carbon steel / coated surfaces; service environment atmospheric exposure / immersion service.
Jotamastic 80 E — positioning
Jotamastic 80 E belongs to the modified epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service service.
The substrate for this product is carbon steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where high solids / surface-tolerant matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / immersion service conditions.
Jotamastic 80 E — key data
| Model | Jotamastic 80 E |
|---|---|
| Manufacturer product name | 0L7 |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / coated surfaces |
| Key characteristics | high solids / surface-tolerant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2 / st 2 |
| Volume solids | 80 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 35 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotamastic-80-e.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 8 h | 4 h | 2 h |
| Walk-on dry | 24 h | 10 h | 4 h |
| Recoat, minimum | 24 h | 10 h | 4 h |
| Dried/cured for service | 14 d | 7 d | 2 d |
Data taken from the manufacturer's TDS jotun-jotamastic-80-e.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / coated surfaces / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Jotamastic 80 E follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Jotamastic 80 E — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotamastic 80 E and the intended use.
Jotamastic 80 E — common questions
What are the key characteristics of Jotamastic 80 E?
This model offers high solids / surface-tolerant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Jotamastic 80 E controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Jotamastic 80 E be used on?
The TDS lists the substrate as carbon steel / coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
Models related to Jotamastic 80 E
- Balloxy BT
- Balloxy HB Light
- Jotamastic 80 Aluminium
- Jotamastic 80 MIO
- Jotamastic 87
- Jotamastic 87 Aluminium
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotamastic 80 E
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net