Jota-Etch industrial
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jota-Etch — product overview
A one-component industrial coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on galvanised steel / stainless steel.
Jota-Etch — positioning
Jota-Etch is a industrial primer from the Jotun range, formulated for steel structures in atmospheric exposure.
Three things decide the system: the substrate (galvanised steel / stainless steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure.
Jota-Etch — key data
| Model | Jota-Etch |
|---|---|
| Manufacturer product name | 0CT |
| Resin system | industrial |
| Components | one-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | galvanised steel / stainless steel |
| Colour range | Light grey / Yellow / Black |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 14 % ± 2 % |
| Density (specific gravity) | 1 kg/l |
| Flash point | 10 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jota-etch.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 23 °C | 40 °C |
|---|---|---|
| Touch dry | 5 min | 1 min |
| Walk-on dry | 1 h | 40 min |
| Recoat, minimum | 4 h | 3 h |
Data taken from the manufacturer's TDS jotun-jota-etch.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (galvanised steel / stainless steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- ISO 8503-2
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jota-Etch — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
For the full technical data on Jota-Etch, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jota-Etch — common questions
Which substrates can Jota-Etch be used on?
The TDS lists the substrate as galvanised steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jota-Etch?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jota-Etch have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Jota-Etch
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jota-Etch
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net