Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop CA industrial

Hardtop CA (0MM) is the industrial topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers high solids. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop CA.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop CA — product overview

Hardtop CA belongs to the industrial system and is a two-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.

Hardtop CA — positioning

Hardtop CA belongs to the industrial family of Jotun protective coatings and is used as topcoat in atmospheric exposure service.

Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

The model is notable for high solids.

Typical service environment: atmospheric exposure.

Hardtop CA — key data

ModelHardtop CA
Manufacturer product name0MM
Resin systemindustrial
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Key characteristicshigh solids
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids60 % ± 2 %
Density (specific gravity)1,3 kg/l
Flash point28 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-ca.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry6 h4 h2.5 h2 h
Walk-on dry72 h36 h5 h5 h
Recoat, minimum72 h36 h5 h5 h
Dried/cured for service28 d14 d12 d3 d

Data taken from the manufacturer's TDS jotun-hardtop-ca.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Hardtop CA follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Hardtop CA — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Hardtop CA and the intended use.

Hardtop CA — common questions

What are the key characteristics of Hardtop CA?

This model offers high solids. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Hardtop CA controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Hardtop CA be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Hardtop CA

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop CA

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat