Offshore steel structures and ship coating (heavy-duty)
Model

Aluflex alkyd

Jotun's Aluflex is a alkyd topcoat for atmospheric exposure conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for Aluflex.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Aluflex — product overview

This is a one-component alkyd product, typically used as topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of steel.

Aluflex — positioning

Aluflex is a alkyd topcoat from the Jotun range, formulated for steel structures in atmospheric exposure.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

It is used for protective coating work in atmospheric exposure conditions.

Aluflex — key data

ModelAluflex
Manufacturer product name0BK
Resin systemalkyd
Componentsone-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Colour rangeAluminium
Application methodairless spray / brush / roller
Surface preparation gradest 2
Volume solids40 % ± 2 %
Density (specific gravity)0.9 kg/l
Flash point40 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-aluflex.pdf)

Application and system notes

Application: airless spray / brush / roller (st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry2 h2 h1 h1 h
Walk-on dry20 h10 h8 h2 h
Recoat, minimum12 h9 h6 h4 h

Data taken from the manufacturer's TDS jotun-aluflex.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Aluflex — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Aluflex, send a request at the foot of this page, or contact us on WhatsApp or by email.

Aluflex — common questions

What service environment suits Aluflex?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Aluflex have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Aluflex?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Aluflex

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Aluflex

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat