Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard Type I phenolic epoxy

Jotun's Tankguard Type I is a phenolic epoxy intermediate coat / topcoat for atmospheric exposure / immersion service conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard Type I.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard Type I — product overview

This is a two-component phenolic epoxy product, typically used as intermediate coat / topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel.

Tankguard Type I — positioning

Tankguard Type I belongs to the phenolic epoxy family of Jotun protective coatings and is used as intermediate coat / topcoat in atmospheric exposure / immersion service service.

Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: atmospheric exposure / immersion service.

Tankguard Type I — key data

ModelTankguard Type I
Manufacturer product name0L5
Resin systemphenolic epoxy
Componentstwo-component
Typical number of coatsintermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel
Colour rangeMunsell 5G8/4/Munsell N6.5/Munsell N9.5
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids81 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point28 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-type-i.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C15 °C23 °C40 °C
Touch dry16 h6 h4 h2 h
Walk-on dry24 h10 h6 h3 h
Recoat, minimum48 h30 h20 h10 h
Dried/cured for service14 d10 d5 d3 d

Data taken from the manufacturer's TDS jotun-tankguard-type-i.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Tankguard Type I — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Tankguard Type I, send a request at the foot of this page, or contact us on WhatsApp or by email.

Tankguard Type I — common questions

Where can I find the technical data for Tankguard Type I?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Tankguard Type I take in the system?

This model is typically used as intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Tankguard Type I?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Tankguard Type I

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard Type I

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat