Tankguard Storage phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard Storage — product overview
A two-component phenolic epoxy coating, normally used as intermediate coat / topcoat: key features chemical-resistant; used in atmospheric exposure / immersion service; suitable on carbon steel / galvanised steel / stainless steel / concrete.
Tankguard Storage — positioning
Tankguard Storage belongs to the phenolic epoxy family of Jotun protective coatings and is used as intermediate coat / topcoat in atmospheric exposure / immersion service service.
The substrate for this product is carbon steel / galvanised steel / stainless steel / concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
The model is notable for chemical-resistant.
Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.
Tankguard Storage — key data
| Model | Tankguard Storage |
|---|---|
| Manufacturer product name | 0LD |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete |
| Key characteristics | chemical-resistant |
| Colour range | Light grey / light red / White |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ |
| Volume solids | 63 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 28 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-storage.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 15 °C | 23 °C | 30 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 15 h | 12 h | 4 h | 3 h | 2 h |
| Walk-on dry | 24 h | 20 h | 10 h | 8 h | 4 h |
| Recoat, minimum | 24 h | 20 h | 10 h | 7 h | 4 h |
| Dried/cured for service | 21 d | 14 d | 7 d | 4 d | 3 d |
Data taken from the manufacturer's TDS jotun-tankguard-storage.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel / concrete and the corrosivity of the atmospheric exposure / immersion service environment.
Standards and approvals
- GB 30981-2020
- IMO Res.288(87)
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- NACE No. 6
- PSPC
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Tankguard Storage — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Tankguard Storage, send a request at the foot of this page, or contact us on WhatsApp or by email.
Tankguard Storage — common questions
How many components does Tankguard Storage have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Tankguard Storage?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Tankguard Storage take in the system?
This model is typically used as intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Tankguard Storage
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard Storage
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net