Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Sealer WF epoxy

Penguard Sealer WF is a epoxy topcoat from the Jotun range, formulated for steel structures in atmospheric exposure. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Sealer WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Sealer WF — product overview

A two-component epoxy coating, normally used as topcoat: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on concrete.

Penguard Sealer WF — positioning

Penguard Sealer WF (05Y) — in the Jotun range — is a epoxy product normally used as topcoat where atmospheric exposure conditions apply.

The substrate for this product is concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

This model is manufactured to the manufacturer's technical data sheet.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Penguard Sealer WF — key data

ModelPenguard Sealer WF
Manufacturer product name05Y
Resin systemepoxy
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Suitable substratesconcrete
Colour rangeWhite
Application methodairless spray / brush / roller
Volume solids49 % ± 2 %
Flash point100 °C
GlossSemi-gloss (30-60)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-sealer-wf.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry4 h3 h1.5 h40 min
Walk-on dry24 h16 h10 h40 min
Recoat, minimum24 h16 h10 h3.5 h
Dried/cured for service21 d14 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-sealer-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the concrete and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standards and approvals for Penguard Sealer WF follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Penguard Sealer WF — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Penguard Sealer WF, send a request at the foot of this page, or contact us on WhatsApp or by email.

Penguard Sealer WF — common questions

What are the minimum order quantity and lead time for Penguard Sealer WF?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Penguard Sealer WF?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Penguard Sealer WF controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Models related to Penguard Sealer WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Sealer WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat