Offshore steel structures and ship coating (heavy-duty)
Model

Jotacote UHB epoxy

Jotacote UHB is the epoxy primer / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service. This model offers high-build / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotacote UHB.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotacote UHB — product overview

This is a two-component epoxy product, typically used as primer / topcoat. It is characterised by high-build / abrasion-resistant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / concrete.

Jotacote UHB — positioning

Jotacote UHB is the epoxy primer / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.

Three things decide the system: the substrate (carbon steel / concrete), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

Where high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.

Jotacote UHB — key data

ModelJotacote UHB
Manufacturer product name1FU
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / concrete
Key characteristicshigh-build / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2
Volume solids96 % ± 2 %
Flash point35 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotacote-uhb.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry6 h5 h2 h45 min
Walk-on dry24 h16 h8 h2 h
Recoat, minimum24 h16 h8 h2 h

Data taken from the manufacturer's TDS jotun-jotacote-uhb.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / concrete / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Jotacote UHB follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotacote UHB — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Jotacote UHB, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotacote UHB — common questions

How is the recoat interval for Jotacote UHB controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Jotacote UHB be used on?

The TDS lists the substrate as carbon steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Jotacote UHB?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Jotacote UHB

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotacote UHB

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat