Offshore steel structures and ship coating (heavy-duty)
Model

Jotaguard 630 epoxy

Jotun's Jotaguard 630 is a epoxy primer / topcoat for atmospheric exposure / immersion service / low-temperature application conditions, supplied with its technical documentation. This model offers fast-drying / high solids / high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotaguard 630.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotaguard 630 — product overview

This is a two-component epoxy product, typically used as primer / topcoat. It is characterised by fast-drying / high solids / high-build / surface-tolerant / abrasion-resistant; service environment atmospheric exposure / immersion service / low-temperature application; suitable for protective coating of carbon steel.

Jotaguard 630 — positioning

Jotaguard 630 (0T1) is the epoxy primer / topcoat in the Jotun range; this page sets out its system position, parameters and supply.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

The model is notable for fast-drying / high solids / high-build / surface-tolerant / abrasion-resistant.

Service environments include atmospheric exposure / immersion service / low-temperature application; send the actual conditions for anything outside that range.

Jotaguard 630 — key data

ModelJotaguard 630
Manufacturer product name0T1
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel
Key characteristicsfast-drying / high solids / high-build / surface-tolerant / abrasion-resistant
Colour rangeRed / Grey / Light yellow
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids71 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point31 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotaguard-630.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotaguard 630 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Jotaguard 630, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Jotaguard 630 — common questions

How many components does Jotaguard 630 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Jotaguard 630?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jotaguard 630 take in the system?

This model is typically used as primer / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Jotaguard 630

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotaguard 630

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat