Jota EP20T epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jota EP20T — product overview
Jota EP20T belongs to the epoxy system and is a two-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.
Jota EP20T — positioning
Jota EP20T is the epoxy topcoat in Jotun's protective coatings line, specified for atmospheric exposure service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
The model is notable for fast-drying.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Jota EP20T — key data
| Model | Jota EP20T |
|---|---|
| Manufacturer product name | 0XQ |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / st 2 |
| Volume solids | 58 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 30 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jota-ep20t.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 2 h | 1.5 h | 1 h | 30 min |
| Walk-on dry | 36 h | 24 h | 7.5 h | 3 h |
| Recoat, minimum | 36 h | 24 h | 7.5 h | 3 h |
| Dried/cured for service | 14 d | 10 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-jota-ep20t.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- ISO 8501-4
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jota EP20T — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
For the full technical data on Jota EP20T, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jota EP20T — common questions
How many components does Jota EP20T have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Jota EP20T?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Jota EP20T take in the system?
This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Jota EP20T
- Chemtech GM
- Jotacote HF002
- Jotacote UHB
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jota EP20T
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net