Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Express WF II auxiliary material

Penguard Express WF II (6X7) — in the Jotun range — is a auxiliary material product normally used as inhibitor where as the system requires conditions apply. This model offers fast-drying / high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Express WF II.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Express WF II — product overview

This is a one-component auxiliary material product, typically used as inhibitor. It is characterised by fast-drying / high-build; service environment as the system requires; suitable for protective coating of carbon steel / galvanised steel / stainless steel / concrete.

Penguard Express WF II — positioning

Penguard Express WF II (6X7) — in the Jotun range — is a auxiliary material product normally used as inhibitor where as the system requires conditions apply.

Three things decide the system: the substrate (carbon steel / galvanised steel / stainless steel / concrete), the service environment (as the system requires) and the design life. Together they set the number of coats and the total film thickness.

It suits projects where fast-drying / high-build matters — tight application windows or demanding maintenance regimes.

Service environments include as the system requires; send the actual conditions for anything outside that range.

Penguard Express WF II — key data

ModelPenguard Express WF II
Manufacturer product name6X7
Resin systemauxiliary material
Componentsone-component
Typical number of coatsinhibitor
Service environmentas the system requires
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicsfast-drying / high-build
Colour rangeAs the system requires
Application methodadd to the companion coating
Surface preparation gradesa 2½ / st 2
Volume solids55 % ± 2 %
Density (specific gravity)1.35 kg/l
Flash point100 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-express-wf-ii.pdf)

Application and system notes

Application: add to the companion coating (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry6 h5 h2.5 h1 h
Walk-on dry24 h20 h8 h5 h
Recoat, minimum24 h20 h8 h5 h
Dried/cured for service15 d12 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-express-wf-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as inhibitor; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel / concrete and the corrosivity of the as the system requires environment.

Standards and approvals

Standards and approvals for Penguard Express WF II follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Penguard Express WF II — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Express WF II and the intended use.

Penguard Express WF II — common questions

What are the key characteristics of Penguard Express WF II?

This model offers fast-drying / high-build. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Penguard Express WF II controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Penguard Express WF II be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Penguard Express WF II

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Express WF II

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat