Offshore steel structures and ship coating (heavy-duty)
Model

Penguard E33 WF II auxiliary material

Penguard E33 WF II is a auxiliary material inhibitor from the Jotun range, formulated for steel structures in as the system requires. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Penguard E33 WF II.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard E33 WF II — product overview

Penguard E33 WF II belongs to the auxiliary material system and is a one-component product used as inhibitor; service environment as the system requires; application and system notes are set out below.

Penguard E33 WF II — positioning

Penguard E33 WF II is the auxiliary material inhibitor in Jotun's protective coatings line, specified for as the system requires service.

The substrate for this product is carbon steel / galvanised steel / stainless steel / concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where fast-drying are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in as the system requires conditions.

Penguard E33 WF II — key data

ModelPenguard E33 WF II
Manufacturer product name6KK
Resin systemauxiliary material
Componentsone-component
Typical number of coatsinhibitor
Service environmentas the system requires
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicsfast-drying
Colour rangeAs the system requires
Application methodadd to the companion coating
Surface preparation gradesa 2½ / st 2
Volume solids52 % ± 2 %
Density (specific gravity)1.3 kg/l
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-e33-wf-ii.pdf)

Application and system notes

Application: add to the companion coating (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry2 h45 min25 min15 min
Walk-on dry15 h8 h3 h2 h
Recoat, minimum15 h8 h3 h2 h

Data taken from the manufacturer's TDS jotun-penguard-e33-wf-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Penguard E33 WF II — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard E33 WF II and the intended use.

Penguard E33 WF II — common questions

What service environment suits Penguard E33 WF II?

The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Penguard E33 WF II have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Penguard E33 WF II?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Penguard E33 WF II

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard E33 WF II

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat