Offshore steel structures and ship coating (heavy-duty)
Model

Inhibitor 53 auxiliary material

Jotun's Inhibitor 53 is a auxiliary material inhibitor for as the system requires conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for Inhibitor 53.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Inhibitor 53 — product overview

This is a one-component auxiliary material product, typically used as inhibitor. It is characterised by manufactured to the manufacturer's technical data sheet; service environment as the system requires; suitable for protective coating of steel.

Inhibitor 53 — positioning

A auxiliary material inhibitor in the Jotun range, Inhibitor 53 (0K3) is selected for steel structures exposed to as the system requires.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

This model is manufactured to the manufacturer's technical data sheet.

Service environments include as the system requires; send the actual conditions for anything outside that range.

Inhibitor 53 — key data

ModelInhibitor 53
Manufacturer product name0K3
Resin systemauxiliary material
Componentsone-component
Typical number of coatsinhibitor
Service environmentas the system requires
Colour rangeAs the system requires
Application methodadd to the companion coating
Density (specific gravity)0,9 kg/l
Flash point100 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-inhibitor-53.pdf)

Application and system notes

Application: add to the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.

For verification, the original manufacturer's TDS for this model can be requested.

Coat sequence, film thickness and quantity depend on the service conditions (steel / as the system requires) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Inhibitor 53 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Inhibitor 53, send a request at the foot of this page, or contact us on WhatsApp or by email.

Inhibitor 53 — common questions

How is the recoat interval for Inhibitor 53 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Inhibitor 53 be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Inhibitor 53?

The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Inhibitor 53

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Inhibitor 53

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat