Jotatop BC180 SF polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotatop BC180 SF — product overview
Jotatop BC180 SF belongs to the polyurethane system and is a two-component product used as primer; service environment atmospheric exposure; application and system notes are set out below.
Jotatop BC180 SF — positioning
Jotun's Jotatop BC180 SF is a polyurethane primer for atmospheric exposure conditions, supplied with its technical documentation.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where high solids / abrasion-resistant matters — tight application windows or demanding maintenance regimes.
Typical service environment: atmospheric exposure.
Jotatop BC180 SF — key data
| Model | Jotatop BC180 SF |
|---|---|
| Manufacturer product name | 6SW |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Key characteristics | high solids / abrasion-resistant |
| Colour range | Limited colour range |
| Application method | airless spray / brush / roller |
| Volume solids | 97 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 85 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotatop-bc180-sf.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 3 h | 2 h | 1.5 h | 1 h |
| Recoat, minimum | 12 h | 6 h | 3 h | 3 h |
| Dried/cured for service | 16 d | 10 d | 7 d | 4 d |
Data taken from the manufacturer's TDS jotun-jotatop-bc180-sf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotatop BC180 SF — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Jotatop BC180 SF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotatop BC180 SF — common questions
How is the recoat interval for Jotatop BC180 SF controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Jotatop BC180 SF be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotatop BC180 SF?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Jotatop BC180 SF
- Hardtop E99 WF
- Hardtop E99 WF HG
- Hardtop Express WFL
- Hardtop M WF
- Hardtop Metallic Uni WF
- Hardtop WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotatop BC180 SF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net