Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop WF polyurethane

Jotun's Hardtop WF is a polyurethane primer / topcoat for atmospheric exposure conditions, supplied with its technical documentation. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop WF — product overview

Hardtop WF belongs to the polyurethane system and is a two-component product used as primer / topcoat; service environment atmospheric exposure; application and system notes are set out below.

Hardtop WF — positioning

Hardtop WF (6DX) is the polyurethane primer / topcoat in the Jotun range; this page sets out its system position, parameters and supply.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where chemical-resistant are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Hardtop WF — key data

ModelHardtop WF
Manufacturer product name6DX
Resin systempolyurethane
Componentstwo-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure
Key characteristicschemical-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids52 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point101 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-wf.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C35 °C
Touch dry2 h75 min30 min
Walk-on dry18 h9 h3 h
Recoat, minimum18 h9 h3 h

Data taken from the manufacturer's TDS jotun-hardtop-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Hardtop WF — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Hardtop WF, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Hardtop WF — common questions

How many components does Hardtop WF have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Hardtop WF?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Hardtop WF take in the system?

This model is typically used as primer / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Hardtop WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat