Hardtop M WF polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop M WF — product overview
two-component polyurethane product for use as primer / intermediate coat / topcoat; chemical-resistant; substrates steel; service environment atmospheric exposure.
Hardtop M WF — positioning
Hardtop M WF is the polyurethane primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure service.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where chemical-resistant are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Hardtop M WF — key data
| Model | Hardtop M WF |
|---|---|
| Manufacturer product name | 6JY |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | chemical-resistant |
| Colour range | To the manufacturer colour card |
| Application method | brush / roller |
| Volume solids | 51 % ± 2 % |
| Density (specific gravity) | 1.3 kg/l |
| Flash point | 101 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-m-wf.pdf) |
Application and system notes
Application: brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 35 °C |
|---|---|---|---|
| Touch dry | 1.5 h | 40 min | 20 min |
| Walk-on dry | 12 h | 7 h | 2 h |
| Recoat, minimum | 12 h | 7 h | 2 h |
Data taken from the manufacturer's TDS jotun-hardtop-m-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- ISO 2813
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Hardtop M WF — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Hardtop M WF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Hardtop M WF — common questions
Where can I find the technical data for Hardtop M WF?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Hardtop M WF take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Hardtop M WF?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Hardtop M WF
- Hardtop E99 WF HG
- Hardtop E99 WF
- Hardtop Express WFL
- Hardtop Metallic Uni WF
- Hardtop WF
- Jotatop LEP Tiecoat
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop M WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net