Offshore steel structures and ship coating (heavy-duty)
Model

Jotatemp 540 Zinc inorganic zinc silicate

Jotatemp 540 Zinc (04N) is the inorganic zinc silicate single-coat system in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for Jotatemp 540 Zinc.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotatemp 540 Zinc — product overview

two-component inorganic zinc silicate product for use as single-coat system; manufactured to the manufacturer's technical data sheet; substrates carbon steel; service environment high temperature.

Jotatemp 540 Zinc — positioning

A inorganic zinc silicate single-coat system in the Jotun range, Jotatemp 540 Zinc (04N) is selected for steel structures exposed to high temperature.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: high temperature.

Jotatemp 540 Zinc — key data

ModelJotatemp 540 Zinc
Manufacturer product name04N
Resin systeminorganic zinc silicate
Componentstwo-component
Typical number of coatssingle-coat system
Service environmenthigh temperature
Suitable substratescarbon steel
Colour rangeBlue grey
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids80 % ± 2 %
Density (specific gravity)2 kg/l
Flash point19 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotatemp-540-zinc.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry1 h30 min15 min10 min
Walk-on dry1.5 h45 min30 min25 min
Recoat, minimum15 h10 h3 h1 h
Dried/cured for service15 h10 h3 h1 h

Data taken from the manufacturer's TDS jotun-jotatemp-540-zinc.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotatemp 540 Zinc — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

For the full technical data on Jotatemp 540 Zinc, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Jotatemp 540 Zinc — common questions

Where can I find the technical data for Jotatemp 540 Zinc?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jotatemp 540 Zinc take in the system?

This model is typically used as single-coat system. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Jotatemp 540 Zinc?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Jotatemp 540 Zinc

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotatemp 540 Zinc

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat