Hardtop XP II WB polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop XP II WB — product overview
This is a two-component polyurethane product, typically used as primer. It is characterised by chemical-resistant; service environment atmospheric exposure; suitable for protective coating of steel.
Hardtop XP II WB — positioning
Hardtop XP II WB belongs to the polyurethane family of Jotun protective coatings and is used as primer in atmospheric exposure service.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where chemical-resistant are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Hardtop XP II WB — key data
| Model | Hardtop XP II WB |
|---|---|
| Manufacturer product name | |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Key characteristics | chemical-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Volume solids | 48 % ± 2 % |
| Density (specific gravity) | 1.35 kg/l |
| Flash point | 101 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-xp-ii-wb.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 35 °C |
|---|---|---|---|
| Touch dry | 1.5 h | 40 min | 20 min |
| Walk-on dry | 12 h | 6 h | 3 h |
| Recoat, minimum | 12 h | 6 h | 3 h |
Data taken from the manufacturer's TDS jotun-hardtop-xp-ii-wb.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 12944-2
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Hardtop XP II WB — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Hardtop XP II WB, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Hardtop XP II WB — common questions
What service environment suits Hardtop XP II WB?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Hardtop XP II WB have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Hardtop XP II WB?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Hardtop XP II WB
- Hardtop E99 WF
- Hardtop E99 WF HG
- Hardtop Express WFL
- Hardtop M WF
- Hardtop Metallic Uni WF
- Hardtop WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop XP II WB
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net