Hardtop XP Alu polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop XP Alu — product overview
two-component polyurethane product for use as topcoat; high solids; substrates steel; service environment atmospheric exposure.
Hardtop XP Alu — positioning
A polyurethane topcoat in the Jotun range, Hardtop XP Alu (0Q2) is selected for steel structures exposed to atmospheric exposure.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
The model is notable for high solids.
It is used for protective coating work in atmospheric exposure conditions.
Hardtop XP Alu — key data
| Model | Hardtop XP Alu |
|---|---|
| Manufacturer product name | 0Q2 |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids |
| Colour range | RAL 9006/RAL 9007 |
| Application method | airless spray / brush |
| Volume solids | 63 % ± 2 % |
| Density (specific gravity) | 1.1 kg/l |
| Flash point | 30 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-xp-alu.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 20 h | 16 h | 6 h | 3.5 h | 2 h |
| Walk-on dry | 30 h | 24 h | 14 h | 7 h | 4 h |
| Recoat, minimum | 30 h | 24 h | 14 h | 7 h | 4 h |
| Dried/cured for service | 21 d | 21 d | 14 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-xp-alu.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Hardtop XP Alu — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Hardtop XP Alu and the intended use.
Hardtop XP Alu — common questions
Where can I find the technical data for Hardtop XP Alu?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Hardtop XP Alu take in the system?
This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Hardtop XP Alu?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Hardtop XP Alu
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop XP Alu
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net