Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop AX C polyurethane

Jotun's Hardtop AX C is a polyurethane topcoat for atmospheric exposure conditions, supplied with its technical documentation. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop AX C.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop AX C — product overview

This is a two-component polyurethane product, typically used as topcoat. It is characterised by chemical-resistant; service environment atmospheric exposure; suitable for protective coating of steel.

Hardtop AX C — positioning

Hardtop AX C (6GG) is the polyurethane topcoat in the Jotun range; this page sets out its system position, parameters and supply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where chemical-resistant matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure conditions.

Hardtop AX C — key data

ModelHardtop AX C
Manufacturer product name6GG
Resin systempolyurethane
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Key characteristicschemical-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids63 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point33 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-ax-c.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C40 °C
Touch dry3 h2 h1 h30 min15 min
Walk-on dry48 h28 h18 h7 h4 h
Recoat, minimum24 h18 h10 h5 h3 h
Dried/cured for service20 d14 d10 d5 d2 d

Data taken from the manufacturer's TDS jotun-hardtop-ax-c.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Hardtop AX C — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Hardtop AX C, send a request at the foot of this page, or contact us on WhatsApp or by email.

Hardtop AX C — common questions

Where can I find the technical data for Hardtop AX C?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Hardtop AX C take in the system?

This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Hardtop AX C?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Hardtop AX C

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop AX C

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat