Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop XP polyurethane

A polyurethane topcoat in the Jotun range, Hardtop XP (0UV) is selected for steel structures exposed to atmospheric exposure. This model offers high solids. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop XP.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop XP — product overview

Hardtop XP belongs to the polyurethane system and is a two-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.

Hardtop XP — positioning

Hardtop XP belongs to the polyurethane family of Jotun protective coatings and is used as topcoat in atmospheric exposure service.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where high solids are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure conditions.

Hardtop XP — key data

ModelHardtop XP
Manufacturer product name0UV
Resin systempolyurethane
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Key characteristicshigh solids
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids63 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point30 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-xp.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry16 h6 h3.5 h2 h
Walk-on dry24 h14 h7 h4 h
Recoat, minimum24 h14 h7 h4 h
Dried/cured for service21 d14 d7 d3 d

Data taken from the manufacturer's TDS jotun-hardtop-xp.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Hardtop XP — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Hardtop XP, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Hardtop XP — common questions

How is the recoat interval for Hardtop XP controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Hardtop XP be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Hardtop XP?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Hardtop XP

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop XP

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat