Hardtop WT8 polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop WT8 — product overview
A two-component polyurethane coating, normally used as topcoat: key features high solids / chemical-resistant; used in atmospheric exposure; suitable on steel.
Hardtop WT8 — positioning
Hardtop WT8 is a polyurethane topcoat from the Jotun range, formulated for steel structures in atmospheric exposure.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
It suits projects where high solids / chemical-resistant matters — tight application windows or demanding maintenance regimes.
Typical service environment: atmospheric exposure.
Hardtop WT8 — key data
| Model | Hardtop WT8 |
|---|---|
| Manufacturer product name | 6FN |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids / chemical-resistant |
| Colour range | Light grey |
| Application method | airless spray / brush / roller |
| Volume solids | 62 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 28 °C |
| Gloss | Semi-gloss |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-wt8.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Walk-on dry | 40 h | 24 h | 16 h | 8 h | 4 h |
| Recoat, minimum | 24 h | 18 h | 10 h | 5 h | 3 h |
| Dried/cured for service | 20 d | 14 d | 10 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-wt8.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981-2020
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Hardtop WT8 — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Hardtop WT8, send a request at the foot of this page, or contact us on WhatsApp or by email.
Hardtop WT8 — common questions
How is the recoat interval for Hardtop WT8 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Hardtop WT8 be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Hardtop WT8?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Hardtop WT8
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop WT8
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net