Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop HB polyurethane

Hardtop HB belongs to the polyurethane family of Jotun protective coatings and is used as topcoat in atmospheric exposure service. This model offers high-build. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop HB.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop HB — product overview

A two-component polyurethane coating, normally used as topcoat: key features high-build; used in atmospheric exposure; suitable on steel.

Hardtop HB — positioning

Hardtop HB (0DE) is the polyurethane topcoat in the Jotun range; this page sets out its system position, parameters and supply.

Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Where high-build are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure conditions.

Hardtop HB — key data

ModelHardtop HB
Manufacturer product name0DE
Resin systempolyurethane
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Key characteristicshigh-build
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Volume solids50 % ± 2 %
Density (specific gravity)1.2 kg/l
Flash point26 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-hb.pdf)

Application and system notes

Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C40 °C
Touch dry16 h8 h4 h2 h1 h
Walk-on dry50 h35 h20 h10 h5 h
Recoat, minimum30 h21 h12 h6 h3 h
Dried/cured for service20 d15 d10 d5 d2 d

Data taken from the manufacturer's TDS jotun-hardtop-hb.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Hardtop HB — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Hardtop HB, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Hardtop HB — common questions

Which substrates can Hardtop HB be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Hardtop HB?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Hardtop HB have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Hardtop HB

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop HB

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat