Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop F20 HS fluoropolymer

Hardtop F20 HS (6MP) is the fluoropolymer topcoat in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop F20 HS.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop F20 HS — product overview

A two-component fluoropolymer coating, normally used as topcoat: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on steel.

Hardtop F20 HS — positioning

Hardtop F20 HS is a fluoropolymer topcoat from the Jotun range, formulated for steel structures in atmospheric exposure.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

This model is manufactured to the manufacturer's technical data sheet.

Typical service environment: atmospheric exposure.

Hardtop F20 HS — key data

ModelHardtop F20 HS
Manufacturer product name6MP
Resin systemfluoropolymer
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Volume solids60 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point34 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-f20-hs.pdf)

Application and system notes

Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry2 h1 h30 min20 min
Walk-on dry32 h16 h8 h4 h
Recoat, minimum32 h16 h8 h4 h
Dried/cured for service15 d10 d5 d2 d

Data taken from the manufacturer's TDS jotun-hardtop-f20-hs.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Hardtop F20 HS follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Hardtop F20 HS — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Hardtop F20 HS and the intended use.

Hardtop F20 HS — common questions

What are the key characteristics of Hardtop F20 HS?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Hardtop F20 HS controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Hardtop F20 HS be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Hardtop F20 HS

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop F20 HS

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat