Hardtop F10 HS fluoropolymer
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop F10 HS — product overview
A two-component fluoropolymer coating, normally used as topcoat: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on steel.
Hardtop F10 HS — positioning
Hardtop F10 HS is the fluoropolymer topcoat in Jotun's protective coatings line, specified for atmospheric exposure service.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: atmospheric exposure.
Hardtop F10 HS — key data
| Model | Hardtop F10 HS |
|---|---|
| Manufacturer product name | 6G6 |
| Resin system | fluoropolymer |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Volume solids | 66 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 38 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-f10-hs.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 2 h | 1 h | 30 min | 20 min |
| Walk-on dry | 32 h | 16 h | 8 h | 4 h |
| Recoat, minimum | 32 h | 16 h | 8 h | 4 h |
| Dried/cured for service | 15 d | 10 d | 5 d | 2 d |
Data taken from the manufacturer's TDS jotun-hardtop-f10-hs.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981-2020
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Hardtop F10 HS — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Hardtop F10 HS, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Hardtop F10 HS — common questions
What are the minimum order quantity and lead time for Hardtop F10 HS?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Hardtop F10 HS?
This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Hardtop F10 HS controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Models related to Hardtop F10 HS
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop F10 HS
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net