Hardtop Eco polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop Eco — product overview
Hardtop Eco belongs to the polyurethane system and is a two-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.
Hardtop Eco — positioning
Hardtop Eco (0XK) is the polyurethane topcoat in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
The model is notable for chemical-resistant.
Typical service environment: atmospheric exposure.
Hardtop Eco — key data
| Model | Hardtop Eco |
|---|---|
| Manufacturer product name | 0XK |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | chemical-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Volume solids | 73 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 32 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-eco.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Walk-on dry | 16 h | 8 h | 4 h |
| Recoat, minimum | 10 h | 5 h | 3 h |
| Dried/cured for service | 10 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-eco.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Hardtop Eco follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Hardtop Eco — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
For the full technical data on Hardtop Eco, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Hardtop Eco — common questions
Which coat does Hardtop Eco take in the system?
This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Hardtop Eco?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Hardtop Eco?
This model offers chemical-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Hardtop Eco
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop Eco
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net