Hardtop E88 B polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop E88 B — product overview
two-component polyurethane product for use as topcoat; fast-drying; substrates steel; service environment atmospheric exposure.
Hardtop E88 B — positioning
Hardtop E88 B belongs to the polyurethane family of Jotun protective coatings and is used as topcoat in atmospheric exposure service.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where fast-drying matters — tight application windows or demanding maintenance regimes.
Typical service environment: atmospheric exposure.
Hardtop E88 B — key data
| Model | Hardtop E88 B |
|---|---|
| Manufacturer product name | 6BF |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying |
| Colour range | A selection within the bright colour range |
| Application method | airless spray |
| Volume solids | 56 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 35 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-e88-b.pdf) |
Application and system notes
Application: airless spray. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 2 h | 1 h | 30 min | 20 min |
| Walk-on dry | 15 h | 10 h | 4 h | 3 h |
| Recoat, minimum | 15 h | 10 h | 4 h | 3 h |
| Dried/cured for service | 21 d | 14 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-e88-b.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Hardtop E88 B — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Hardtop E88 B and the intended use.
Hardtop E88 B — common questions
How many components does Hardtop E88 B have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Hardtop E88 B?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Hardtop E88 B take in the system?
This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Hardtop E88 B
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop E88 B
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net