Hardtop E88 polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop E88 — product overview
Hardtop E88 belongs to the polyurethane system and is a two-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.
Hardtop E88 — positioning
A polyurethane topcoat in the Jotun range, Hardtop E88 (0ZG) is selected for steel structures exposed to atmospheric exposure.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where fast-drying are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in atmospheric exposure conditions.
Hardtop E88 — key data
| Model | Hardtop E88 |
|---|---|
| Manufacturer product name | 0ZG |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray |
| Volume solids | 56 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 35 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-e88.pdf) |
Application and system notes
Application: airless spray. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 2 h | 1 h | 30 min | 20 min |
| Walk-on dry | 15 h | 10 h | 4 h | 3 h |
| Recoat, minimum | 15 h | 10 h | 4 h | 3 h |
| Dried/cured for service | 21 d | 14 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-e88.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Hardtop E88 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Hardtop E88 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Hardtop E88, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Hardtop E88 — common questions
Which substrates can Hardtop E88 be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Hardtop E88?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Hardtop E88 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Hardtop E88
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop E88
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net