Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard NCV phenolic epoxy

Tankguard NCV belongs to the phenolic epoxy family of Jotun protective coatings and is used as primer / intermediate coat in atmospheric exposure / immersion service service. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard NCV.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard NCV — product overview

This is a two-component phenolic epoxy product, typically used as primer / intermediate coat. It is characterised by chemical-resistant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / stainless steel.

Tankguard NCV — positioning

Tankguard NCV is the phenolic epoxy primer / intermediate coat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

The model is notable for chemical-resistant.

Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.

Tankguard NCV — key data

ModelTankguard NCV
Manufacturer product name0H2
Resin systemphenolic epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel
Key characteristicschemical-resistant
Colour rangeLight grey / light red
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids63 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point28 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-ncv.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-5 °C0 °C5 °C10 °C15 °C23 °C40 °C
Touch dry12 h10 h5 h4 h3 h2 h1 h
Walk-on dry48 h30 h16 h12 h10 h8 h4 h
Recoat, minimum24 h20 h10 h8 h6 h4 h2 h
Dried/cured for service30 d21 d14 d10 d8 d6 d3 d

Data taken from the manufacturer's TDS jotun-tankguard-ncv.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Tankguard NCV — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Tankguard NCV, send a request at the foot of this page, or contact us on WhatsApp or by email.

Tankguard NCV — common questions

Where can I find the technical data for Tankguard NCV?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Tankguard NCV take in the system?

This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Tankguard NCV?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Tankguard NCV

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard NCV

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat