Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard DW epoxy

Tankguard DW is a epoxy primer / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service. This model offers potable water tanks. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard DW.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard DW — product overview

two-component epoxy product for use as primer / topcoat; potable water tanks; substrates carbon steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.

Tankguard DW — positioning

A epoxy primer / topcoat in the Jotun range, Tankguard DW (0LW) is selected for steel structures exposed to atmospheric exposure / immersion service.

Three things decide the system: the substrate (carbon steel / stainless steel / concrete), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

The model is notable for potable water tanks.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Tankguard DW — key data

ModelTankguard DW
Manufacturer product name0LW
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel / concrete
Key characteristicspotable water tanks
Colour rangeLight grey / White
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids100 %
Density (specific gravity)1.4 kg/l
Flash point100 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-dw.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry15 h10 h3 h
Walk-on dry25 h13 h5 h
Recoat, minimum25 h13 h5 h

Data taken from the manufacturer's TDS jotun-tankguard-dw.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / stainless steel / concrete / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Tankguard DW follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Tankguard DW — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Tankguard DW, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Tankguard DW — common questions

What are the key characteristics of Tankguard DW?

This model offers potable water tanks. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Tankguard DW controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Tankguard DW be used on?

The TDS lists the substrate as carbon steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Tankguard DW

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard DW

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat