Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Topcoat epoxy

Penguard Topcoat is a epoxy topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Topcoat.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Topcoat — product overview

two-component epoxy product for use as topcoat; manufactured to the manufacturer's technical data sheet; substrates steel; service environment atmospheric exposure / immersion service.

Penguard Topcoat — positioning

Penguard Topcoat is a epoxy topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service.

Three things decide the system: the substrate (steel), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

This model is manufactured to the manufacturer's technical data sheet.

Typical service environment: atmospheric exposure / immersion service.

Penguard Topcoat — key data

ModelPenguard Topcoat
Manufacturer product name368
Resin systemepoxy
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure / immersion service
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids50 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point25 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-topcoat.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry2.5 h1.5 h30 min
Walk-on dry14 h6.5 h3 h
Recoat, minimum14 h7 h3 h
Dried/cured for service14 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-topcoat.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard Topcoat — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Topcoat and the intended use.

Penguard Topcoat — common questions

Which substrates can Penguard Topcoat be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Penguard Topcoat?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Penguard Topcoat have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Penguard Topcoat

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Topcoat

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat