Penguard Primer epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Primer — product overview
A two-component epoxy coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure / immersion service; suitable on steel.
Penguard Primer — positioning
Jotun's Penguard Primer is a epoxy primer for atmospheric exposure / immersion service conditions, supplied with its technical documentation.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure / immersion service.
Penguard Primer — key data
| Model | Penguard Primer |
|---|---|
| Manufacturer product name | 0FC |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure / immersion service |
| Colour range | Grey / Red |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 51 % ± 2 % |
| Density (specific gravity) | 1.3 kg/l |
| Flash point | 25 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-primer.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 2 h | 1 h | 30 min |
| Walk-on dry | 14 h | 6.5 h | 3 h |
| Recoat, minimum | 8 h | 4 h | 3 h |
| Dried/cured for service | 14 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-penguard-primer.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure / immersion service environment.
Standards and approvals
- GB 30981-2020
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Penguard Primer follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard Primer — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Primer and the intended use.
Penguard Primer — common questions
How many components does Penguard Primer have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Penguard Primer?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Penguard Primer take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Penguard Primer
- Jotacote HF002
- Jotacote UHB
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
- Jotaguard 100
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Primer
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net