Penguard HB II epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard HB II — product overview
two-component epoxy product for use as intermediate coat / topcoat; high solids / high-build; substrates steel; service environment atmospheric exposure / low-temperature application.
Penguard HB II — positioning
Penguard HB II belongs to the epoxy family of Jotun protective coatings and is used as intermediate coat / topcoat in atmospheric exposure / low-temperature application service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
The model is notable for high solids / high-build.
It is used for protective coating work in atmospheric exposure / low-temperature application conditions.
Penguard HB II — key data
| Model | Penguard HB II |
|---|---|
| Manufacturer product name | 0RU |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat / topcoat |
| Service environment | atmospheric exposure / low-temperature application |
| Key characteristics | high solids / high-build |
| Colour range | To the manufacturer colour card |
| Application method | airless spray / brush / roller |
| Volume solids | 65 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 25 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-hb-ii.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- FDA Title 21
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Penguard HB II follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard HB II — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard HB II and the intended use.
Penguard HB II — common questions
How many components does Penguard HB II have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Penguard HB II?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Penguard HB II take in the system?
This model is typically used as intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Penguard HB II
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Jotatemp 210
- Penguard EXA II
- Penguard Express 2064
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard HB II
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net